- 商家货号：E17649
This portable mini crystal valve spot-welding machine is easy to operate, mainly used for maintenance of small energy demand machines such as cell packs, electric playthings and model airplanes.
Features:
Wide welding applications of power supply: lithium cell energy supply or 12V auto cell.
Controlled by a microcomputer with single chip to achieve accurate output pulse, ensuring the welding quality.
With LCD display screen, it can display welding parameters.
The welding pens and the energy input lines are connected through U-shaped cold-pressed terminals, convenient for disassembly and replacement.
Adopts automatic welding mode, while retaining the manual trigger interface to choose at will according to the actual situation.
The energy board adopts 2oz copper to increase the over-current capacity.
Adopts 5 * 300A non-disassembled MOS tube, ensuring high quality and stable performance.
The MOS tube driver adopts the imported special chip driver, fast switch & safety assurance.
10AWG multi-filament flexible wire is used for the welding pen line and the input line to increase the over-current capacity.
The controller is mainly for welding nickel-plated steel strips from 0.1mm to 0.15mm.
A 25V 10000uF high-frequency low-resistance capacitor is added to the energy input for energy compensation, which increases welding stability.
Specifications:
Material: Metal
Color: Red
Input Line Length: Approx. 200mm / 7.87in
Length Of Welding Pen: Approx. 300mm / 11.81in
Package Size: Approx. 28*20*12cm / 11.02*7.87*4.72in
Package Weight: Approx. 200g / 7.05oz
Note:
- Battery Selection:
1.12V 25~40mAh auto battery, requires nice performance and low internal resistance.
2.4000~6000mAh, 45C~60C 3S aircraft lithium battery.
3.30~35mAh 12V capacity lithium cell pack
- Welding Materials: 0.1～0.12mm thick nickel-plated steel strip
- Energy Setting: Energy must increase from 01 gradually, and the maximum cannot exceed 50, or it may damage the controller.
Packing List:
1 * Controller
2 * Welding Pen
2 * Energy Input Line (Red & Blue)
2 * U-Shaped Cold-Pressed Terminal
1 * Tin Bar
Several * Heat-Shrinkable Tube
Features:
Wide welding applications of power supply: lithium cell energy supply or 12V auto cell.
Controlled by a microcomputer with single chip to achieve accurate output pulse, ensuring the welding quality.
With LCD display screen, it can display welding parameters.
The welding pens and the energy input lines are connected through U-shaped cold-pressed terminals, convenient for disassembly and replacement.
Adopts automatic welding mode, while retaining the manual trigger interface to choose at will according to the actual situation.
The energy board adopts 2oz copper to increase the over-current capacity.
Adopts 5 * 300A non-disassembled MOS tube, ensuring high quality and stable performance.
The MOS tube driver adopts the imported special chip driver, fast switch & safety assurance.
10AWG multi-filament flexible wire is used for the welding pen line and the input line to increase the over-current capacity.
The controller is mainly for welding nickel-plated steel strips from 0.1mm to 0.15mm.
A 25V 10000uF high-frequency low-resistance capacitor is added to the energy input for energy compensation, which increases welding stability.
Specifications:
Material: Metal
Color: Red
Input Line Length: Approx. 200mm / 7.87in
Length Of Welding Pen: Approx. 300mm / 11.81in
Package Size: Approx. 28*20*12cm / 11.02*7.87*4.72in
Package Weight: Approx. 200g / 7.05oz
Note:
- Battery Selection:
1.12V 25~40mAh auto battery, requires nice performance and low internal resistance.
2.4000~6000mAh, 45C~60C 3S aircraft lithium battery.
3.30~35mAh 12V capacity lithium cell pack
- Welding Materials: 0.1～0.12mm thick nickel-plated steel strip
- Energy Setting: Energy must increase from 01 gradually, and the maximum cannot exceed 50, or it may damage the controller.
Packing List:
1 * Controller
2 * Welding Pen
2 * Energy Input Line (Red & Blue)
2 * U-Shaped Cold-Pressed Terminal
1 * Tin Bar
Several * Heat-Shrinkable Tube
商品评价
100%好评
共有0人参与评分评价商品