USB 3.1 Type-C SSD External Box Case Aluminum Alloy M.2 NVME/NGFF Solid State Disk Mobile Enclosure Adapter

M.2 SATA NVME to USB 3.1 hard drive enclosure.

Features:
Comply with SATA 3 specifications and comply with USB3.0 specifications.
Support SATA NVME protocol, suitable for M2 (B Key/B+M Key/M Key) SSD.
Support M.2 SSD, 22*30mm, 22*42mm, 22*60mm, 22*80mm solid state drives, (SSD hard drives are not included).
The output speed depends on the type of SSD you use, SATA (6Gbps), NVME (10Gbps).
Dual protocol uses two kinds of cables, Type-C to Type-A (5Gbps) and Type-C to Type-C (10Gbps).
The aluminum alloy shell increases the heat dissipation area, which facilitates the heat dissipation of the hard disk during work and increases the life of the hard disk.
Support UASP protocol.
Easy to use, no need to drive.

Specifications:
Material: Aluminum alloy
Color: Black, Silver (optional)
Main Control Chip: RTL9210B
Output Interface: USB 3.1 TYPE-C
Transmission Rate: 10Gbps
Hard Disk Interface: M KEY, B&M KEY
Support Protocol: Support NVME/NGFF Two Protocols
Support M.2 Hard Disk Size: 2230/2242/2260/2280 Four Sizes
Support Capacity: 2TB MAX
Installation Method: Screw Fixed
Support System: for Win/Linux/ Android
Item Size: 120 * 30 * 8mm / 4.72 * 1.18 * 0.31in
Item Weight: 37g / 1.31ounces
Package Weight: 62g / 2.19ounces
Package Size: 165 * 75 * 20mm / 6.5 * 2.95 * 0.79in

Installation Steps:
Use a screwdriver to unscrew the top screws and take out the PCB board.
Align the slots and install the SSD hard drive.
Tighten the screw at the bottom of the hard drive to fix the hard drive.
Put the installed hard disk into the hard disk box and close the top cover.

Packing List:
1 * USB SSD Enclosure 
1 * Data Cable