Airbrush Spray Pen

Protable Airbrush

Specification:

Item type: oxygen injector

Color: gold/black/red/pink

Material: Aluminum Alloy

Rated power: 7.4v/8-10a

Product type: single action

Air pressure: 150150kpa

Nozzle diameter: 0.4mm

Battery Capacity: 800mah

Charging time: 1 hour

Using time: 20-30 minutes

Weight: 285g

Size: 14.5*11.5*4.5cm/5.7*4.5*1.8in

Product Include:

1 * Main machine

1 * Pistol

3 * water tank

1 * USB cable

1 * box

Matter:

1. Comprehensive Skin Care . It adopts 150kpa high pressure to effectively clean the face, inject oxygen, replenish moisture and import nutrients. It maintains an optimal injection effect by ensuring that no irritation & damage is caused.

2. Fresh Oxygen Injection . The powerful spray it emits can rinse stubborn dirt, oil and dead skin deep into the pores, letting the skin breathe fresh oxygen freely and become glowing.

3. Nano Moisturizing Mist . Water is atomized into ultra-small particles, which are smaller than pores, and can easily penetrate multiple layers to reach deep skin, significantly quenching your thirst.

4. 100% Import of nutrients . Face mask, toner, essence... It can be used to double the absorption of cosmetics and save your required amount. You only need a few drops of a cosmetic liquid to finish a full face spray.

5. Makes Your Life Easier . Tattoo, manicure, cake, makeup... As a multifunctional device, it can be used to color anything you want in your daily life, filling it with more joy and convenience.

Operation:

1. Install the spray gun and tank.

2. Fill the tank with a little water.

3. Turn knob to adjust spray volume.

4. Push back the paddle to enjoy.

Note: this is a single action model. It is normal for the gun to spray air when it is on, and the solution will only spray when you pull the paddle down and back.

Caution:

1. Do not use the product when charging.

2. To avoid bacterial pollution, it is recommended to clean the product with warm water or alcohol before use.

3. Do not add cosmetics other than liquids. The high concentration product must be diluted with mineral water.

4. To prevent nozzle clogging, every time you finish spraying you should: pour pour the remaining liquid into the tank; add add clean water and spray (until there is no spray coming out); spray air spray to completely dry the tank.

5. Only use water-soluble pigments, clean in time after each use, otherwise it will clog

6. Note: This is a single action model. It is normal for the gun to spray air when it is on, and the solution will only spray when you pull the paddle down and back.