- 商家货号:KZT30A-US
10A 20A 30A 40A Solar Charge Controller MPPT Battery Regulator 12V/24V 3 Timing
Product Description
Brief Description:
This is a three-time controller into the evening (evening) working time ,an interval of rest or pause time,Dawn working time (morning light function),the user can according to their needs ,set a different time.
MPPT10A:
MPPT 10A Solar Panel Charge Controller Regulator Solar panel 130W/12V 260W/24V (Without USB Output)
Compatible with 260W(24v) solar panel with dark activated function, Max current is 10A Timer Intigrated (Lighting function)
MPPT 20A:
MPPT 20A Solar Panel Charge Controller Regulator Solar panel 260W/12V 520W/24V (Without USB Output)
Compatible with 520W(24v) solar panel with dark activated function, Max current is 20A Timer Intigrated (Lighting function)
MPPT 30A:
MPPT 30A Solar Panel Charge Controller Regulator Solar panel 380W/12V 760W/24V
Compatible with 760W(24v) solar panel with dark activated function, Max current is 30A Timer Intigrated (Lighting function)
USB 5V charging (for 500mA) for mobile phone.
MPPT 40A:
MPPT 40A Solar Panel Charge Controller Regulator Solar panel 500W/12V 1000W/24V
Compatible with 1000W(24v) solar panel with dark activated function, Max current is 40A Timer Intigrated (Lighting function)
USB 5V charging (for 500mA) for mobile phone.
MPPT Series controller has the following features:
Compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%
1, LCD screen display
2, Easy operation interface
3, MPPT+PWM charging mode(Controller Provided MPPT Maximum power point tracking Function,charging mode is PWM)
4, Parameter user can reset
5, A key to open and close the load
6, A key to restore the factory settings
7, Battery reverse discharge protection
8, Battery reverse polarity protection
9, Battery under voltage protection
10, Overload, short-circuit protection
11, Automatic temperature compensation function
12, Can charge and discharge at the same time, Always keep the battery in full status
Note: Only MPPT 30A and 40A with USB Port.
Package contents:
1、1* MPPT Solar Controller
2、1* English User Manual
3、1* Temp Sensor
Product introduction
LCD screen display |
Battery reverse discharge protection |
Easy operation interface |
Battery reverse polarity protection |
MPPT+ PWM charging mode |
Battery under voltage protection |
Parameter user can reset Overload |
Short-circuit protection |
A key to restore the factory settings |
USB 5V charging (for 500mA) for mobile phone(Only for M30) |
A key to open and close the load |
Automatic temperature compensation function |
Data Sheet
Parameters / Model |
T10 |
T20 |
T30 |
T40 |
Maximum power current |
12A |
20A |
30A |
40A |
Installation Lin mm2 |
4mm2 |
8mm2 |
10mm2 |
12mm2 |
Installation Line(AWG) |
10(AWG) |
8(AWG) |
7(AWG) |
6(AWG) |
Weight |
280g |
300g |
475g |
480 |
Dimensions |
143×89×46 mm |
187*97*61 mm |
||
System load loss |
≤13mA |
|||
Loop Buck |
≤100mV |
Specification
Battery float voltage |
13.8V 12V system /27.6V 24V system |
Battery under voltage) protection |
10.6V 12V system /21.2V 24V system |
Battery (under voltage) recovery voltage |
12.6V 12V system /25.2V 24V system |
Charge mode |
MPPT+PWM MODE |
Operating Temperature |
-10~60°C |
Storage Temperature |
-30~70°C |
Humidity requirements |
≤90%, No condensation |
Temperature compensation |
-4mV/Cell/°C |
Temperature Probe (built components) |
NTC 100K thermistats |
Maximum open circuit voltage of the solar panel |
18V-24V 12V system 36V-48V 24V system) |
Solar panels maximum open circuit voltage (V) |
≤48V |
(Cases) 12V system standard configuration
The peak voltage of the solar cell panel |
18V-25V |
18V-25V |
18V-25V |
18V-25V |
Peak power of solar cell panel |
50W-130W |
100W-260W |
200W-380W |
≤500W |
Model |
T10 |
T20 |
T30 |
T40 |
Battery standard voltage |
12V |
12V |
12V |
12V |
Battery capacity |
≥100AH |
≥200AH |
≥300AH |
≥400AH |
Installation Lin mm2 |
4mm2 |
8mm2 |
10mm2 |
12mm2 |
Installation Line(AWG) |
10(AWG) |
8(AWG) |
7(AWG) |
6(AWG) |
商品评价
100%好评
共有0人参与评分评价商品